| Category | Feature | Specification |
|---|---|---|
| General | Brand | Marsriva |
| General | Model | MR-SPF3.6K-LP1-TL20E |
| General | Product Type | Hybrid Solar Inverter |
| General | Inverter Design | High-frequency |
| General | Phase | Single phase |
| General | Protection Rating | IP20 |
| Power | Rated Output Power | 3.6kW / 3600W |
| Power | Rated Apparent Power | 3.6kVA |
| Power | Power Factor | 1 |
| Power | Surge Capacity | 2 times rated power |
| Input | Nominal AC Input Voltage | 208 / 220 / 230 / 240V AC |
| Input | Voltage Range – UPS Mode | 170–264V AC |
| Input | Voltage Range – APP/GEN Mode | 90–280V AC |
| Input | Frequency Range | 50 / 60Hz ±10Hz, automatic sensing |
| Output | Nominal AC Output Voltage | 208 / 220 / 230 / 240V AC |
| Output | Output Voltage Tolerance | ±5% |
| Output | Output Frequency | 50 / 60Hz |
| Output | Battery-Mode Frequency Accuracy | ±0.1% |
| Output | Output Waveform | Pure sine wave |
| Output | Maximum Efficiency | 92% in battery mode |
| Output | Transfer Time – UPS/APP Mode | 10ms |
| Output | Transfer Time – Generator Mode | 20ms |
| Battery | Nominal Battery Voltage | 24V DC |
| Battery | Battery Voltage Range | 20–30.5V DC |
| Battery | Compatible Battery Types | Lead-acid / Lithium / User-defined |
| Solar Input | Solar Charger Type | MPPT |
| Solar Input | Maximum PV Input Power | 5000W |
| Solar Input | MPPT Voltage Range | 40–450V DC |
| Solar Input | Minimum PV Voltage for Battery-Free Operation | 60V DC |
| Solar Input | Maximum PV Open-Circuit Voltage | 500V DC |
| Solar Input | Maximum PV Input Current | 18A |
| Charging | Maximum Solar Charging Current | 100A |
| Charging | Maximum AC Charging Current | 100A |
| Charging | Maximum Hybrid Charging Current | 100A |
| System | Solar and Utility Power | Supports simultaneous load supply |
| System | Battery-Free Operation | Supported under suitable solar conditions |
| System | Grid Feed-In Function | Supported, subject to installation and regulations |
| Communication | BMS Interface | RS485 / CAN |
| Communication | Additional Interface | Dry-contact |
| Monitoring | Wi-Fi Monitoring | Supported via compatible Wi-Fi module |
| Environment | Operating Temperature | -10°C to 50°C |
| Environment | Storage Temperature | -15°C to 60°C |
| Environment | Relative Humidity | 5%–95%, non-condensing |
| Physical | Dimensions (W × H × D) | 284 × 420 × 104mm |
| Physical | Net Weight | 6.4kg |
| Warranty | Warranty Period | 2 years |
Marsriva MR-SPF3.6K-LP1-TL20E 3.6kW Hybrid Solar Inverter
The Marsriva MR-SPF3.6K-LP1-TL20E 3.6kW Hybrid Solar Inverter is designed for residential, office, and small-business solar power systems. Featuring pure sine wave AC output, a built-in MPPT solar charge controller, 24V battery compatibility, and support for up to 5000W solar PV input, it offers flexible power management for solar and utility-connected installations.
31,900৳
Cash / Online Price
Online / Cash Payment
2,933৳/month
Regular Price: 35,200৳
0% EMI up to 12 Months
Specification
Description
Marsriva MR-SPF3.6K-LP1-TL20E 3.6kW Hybrid Solar Inverter
Marsriva 3.6kW Hybrid Solar Inverter Price in Bangladesh
The Marsriva MR-SPF3.6K-LP1-TL20E is a high-frequency hybrid solar inverter with a rated output of 3.6kW / 3.6kVA. It is designed to manage solar energy, utility power, and compatible battery storage in one system.
Its compact design makes it suitable for homes, offices, shops, and small commercial installations requiring dependable solar power management.
3.6kW Rated Output with Pure Sine Wave Technology
This inverter delivers 3600W rated output with a power factor of 1. Its pure sine wave output is suitable for compatible electrical appliances, computers, networking equipment, lighting, fans, and other loads within the inverter's capacity.
The inverter supports nominal output voltage options of 208V, 220V, 230V, and 240V AC, with an output voltage tolerance of ±5%.
High-Capacity Solar Input with MPPT Technology
The built-in Maximum Power Point Tracking (MPPT) solar charger supports up to 5000W of solar PV input. Its MPPT operating voltage range is 40–450V DC, and the maximum PV open-circuit voltage is 500V DC.
The maximum PV input current is 18A. Solar panel string voltage and current must remain within the inverter's specified limits to ensure safe and efficient operation.
24V Battery Compatibility
The Marsriva MR-SPF3.6K-LP1-TL20E supports a nominal 24V DC battery system, with a specified battery voltage range of 20–30.5V DC. Compatible battery types include lead-acid, lithium, and user-defined batteries.
The inverter supports maximum solar, AC, and hybrid charging currents of up to 100A. Actual charging performance depends on the selected settings, battery specifications, and available power.
Hybrid Solar and Utility Power Management
The inverter can use solar and utility power to supply connected loads simultaneously. It also supports battery-free operation under suitable solar conditions and includes a grid feed-in function where the installation and applicable regulations permit it.
Its transfer time is approximately 10ms in UPS/APP modes and 20ms in generator mode, helping maintain power continuity during supported power-source transitions.
Wi-Fi Monitoring and Battery Communication
The inverter supports Wi-Fi monitoring through its compatible monitoring module and includes BMS communication interfaces using RS485 and CAN, along with a dry-contact interface.
These features help users monitor system performance and integrate compatible battery management systems.
Applications
- Home and residential solar power systems
- Small offices and commercial spaces
- Shops and small businesses
- Computers and networking equipment
- Lighting, fans, and compatible appliances
- Solar systems with compatible 24V batteries
- Solar installations with utility power integration
Installation note: Actual backup time depends on the connected load, battery capacity, battery condition, and solar generation. Grid feed-in must be installed and configured according to local regulations and utility requirements. Professional installation is recommended.
Buy Marsriva MR-SPF3.6K-LP1-TL20E from IOS
International Office Solution (IOS) provides IT equipment, office solutions, and power products in Bangladesh. Contact IOS for the latest price, stock availability, suitable solar panels, compatible batteries, and installation guidance.
Order the Marsriva MR-SPF3.6K-LP1-TL20E 3.6kW Hybrid Solar Inverter from International Office Solution (IOS) with a published 2-year warranty.
Key Features
- Brand: Marsriva
- Model: MR-SPF3.6K-LP1-TL20E
- Product Type: Hybrid Solar Inverter
- Rated Output Power: 3600W / 3.6kW
- Rated Apparent Power: 3.6kVA
- Power Factor: 1
- Battery Voltage: 24V DC
- Maximum Solar PV Input: 5000W
- Solar Charger: Built-in MPPT
- MPPT Voltage Range: 40–450V DC
- Maximum PV Open-Circuit Voltage: 500V DC
- Maximum PV Input Current: 18A
- Maximum Solar Charging Current: 100A
- Output Waveform: Pure sine wave
- Maximum Efficiency: 92% in battery mode
- Battery Compatibility: Lead-acid, lithium, and user-defined
- Monitoring: Wi-Fi module support
- Communication: RS485, CAN, and dry-contact
- Protection Rating: IP20
- Warranty: 2 years
What is the price of Marsriva MR-SPF3.6K-LP1-TL20E 3.6kW Hybrid Solar Inverter in Bangladesh?
The latest price of Marsriva MR-SPF3.6K-LP1-TL20E 3.6kW Hybrid Solar Inverter in Bangladesh is 31,900৳. You can buy the Marsriva MR-SPF3.6K-LP1-TL20E 3.6kW Hybrid Solar Inverter at best price from our website or visit any of our showrooms.
Questions (0)
Have question about this product? Get specific details about this product from expert.
Reviews (0)
Get specific details about this product from customers who own it.